Wire Crimping Tools & Wire Stripping Tools

Supplying Original Abeco Tools manufactured in the EU since 1970

Telephone Support: 01440 710 568

Menu

Find

the right tool!

Use the Wire Guide

Wanted

UK and

European Distributors

Contact Us Now!

 

Additional Crimping Tool Dies

Immediately Available Die Sets from Stock

Small selection of Available International Standard Die Sets

Standard Crimping Frames

3 in 1 Crimp frames

Crimping Tool Die Set

Immediately Available Die Sets from Stock

TD201 TD202 TD203

TD201 Die Set

16-26 AWG

More Info

TD202 Die Set

22 - 10 AWG

More Info

TD203 Die Set

22 - 12 AWG

More Info

TD204 TD205 TD211

TD204 Die Set

22 - 8 AWG

more info

TD204 Die Set

22 - 10 AWG

More Info

Ferrule Terminal

1.5mm - 10mm˛

More Info

TD102    

TD-102

RG-6, RG-174, Belden-

Type RG8218 cables

Hex 0.324(8.23mm),

0.178 (4.52mm)

0.068 (1.73mm)

more info

 

   

TD202 and TD205 Die sets are not suitable for use with New Concept Alloy Crimping Frames; please use with Carbon Steel Ratchet Crimping Frames.

Back to top

Small selection of Available International Standard Die Sets

TD101 TD103 TD104

TD-101

Twinax Hex 0.429

(10.90mm) 0.075

(1.90mm)

TD-103

RG-58, RG-59/62, BNC/

TNC Coax Connectors

Hex, 0.255 (6.48mm), 

0.213 (5.41mm),

0.068 (1.73mm)

TD-104

RG-174, Mini 59 BNC/

TNC Connectors

Hex, 0.178 (4.52mm)

0.128 (3.25mm),

0.068 (1.73mm)

TD105 TD106 TD107

TD-105

N-Series and RG-8/11

Connectors Hex, 0.429

(10.90mm), 0.100 (2.54mm),

0.080 (2.03mm)

TD-106

RG-59, RG-6, and 8281,

50 and 75 ohm cables

Hex, 0.324 (8.23mm),

0.255 (6.48mm),

0.0068 (1.73mm),

0.042 (1.07mm)

TD-107

RG-59, RG-6 F-Type

CATV Connectors

Hex, 0.350 (8.89mm),

0.320 (8.13mm),

0.255 (6.48mm)

TD108 TD109 TD110

TD-108

RG-58, RG-174 and

RG-8281 for both 50

and 75 ohm cables

Hex 0.213 (5.41mm),

0.178 (4.52mm),

0.068 (1.73mm),

0.042 (1.07mm)

TD-109

Plenum and Non-Plenum

thinwire Cables RG-58 and 59

Hex, 0.213 (5.41mm),

0.190 (4.83mm), 0.068

(1.73mm), 0.042 (1.07mm)

TD-110

Mini UHF and BNC / TNC 5

cavity Hex, 0.052 (1.32mm),

0.068 (1.73mm),

0.100 (2.54mm),

0.213 (5.41mm),

0.255 (6.48mm)

TD111 TD112 TD113

TD-111

Fiber-Optic SMA, SMB

or SFR connectors

Hex 0.151 (3.84mm)

0.178 (4.52mm),

0.213 (5.41mm)

TD-112

AMP Combo RG-58,

RG-59/62 Dual Crimp

BNC/TNC Coax Connectors

Hex 0.208 (5.29mm),

0.240 (6.10mm),

0.44 (11.18mm)

0.052 (1.32mm) box center pin

TD-113

AMP thinwire Dual Crimp

BNC Coax Connectors

("0", 0.202) (5.13mm),

0.042 (1.07mm)

box center pin

TD114 TD404 TD406

TD-114

AMP Optimate Fiber

Optic SMA or SFR

type connectors, Round

0.195 (4.95mm),

0.165 (4.19mm),

0.138 (3.51mm)

TD-404

Handset die for four

position handset

modular plugs

 

TD-406

RJ-11 die set for two,

four or six position

modular plugs

TD406A TD406D TD408

TD-406A

RJ-11 AMP die set for two,

four or six position modular

plugs. Primary Strain

relief crimp bar is located

further back on

die/modular plugs

TD-406D

RJ11 DEC MMJ die set

for six-position modular

plugs with an offset

release tab.

TD-408

RJ-45 eight position

die set for keyed or non

keyed modular plugs

(excluding AMP)

TD408A TD410  

TD-408A

RJ-45 AMP die set for

eight-position modular

plugs. Primary strain relief

crimp bar is located further

back on die / modular plug

TD-410

RJ-45 die set for ten

position modular plugs

 

Please contact us for availability of die sets

Back to top

Standard Crimping Frames

Back to top

3 in 1 Crimping Frames

Supplied with one die

TM-05950 TS-05950

TM-05950

More Information

TS-05950

More Information

Back to top

Home | Tools Catalogue | Wire Guide | Search | Site Map | Contact | E-Mail